|
|
|
|
 |
|
|
|
Specifications
The Intel D845GERG2 is a MicroATX motherboard featuring the Intel 845GE chipset. This chipset supports Pentium 4 processors with the 400/533MHz FSB. The motherboard also supports Celeron processors using a 400MHz FSB. The small motherboard also offers an integrated graphics solution in the form of the Intel Extreme Graphics.
Here are the following specifications.
Form Factor:
- MicroATX (9.60 inches by 8.20 inches)
Processor:
- Intel Pentium 4 processor in Socket 478 format with a 400/533 MHz FSB
- Intel Celeron processor in Socket 478 format with a 400 MHz FSB
Memory:
- Two 184 pin DDR SDRAM DIMM sockets
- Support for single sided or double sided DIMMS (DDR 333/266)
- Support for up to 2GB of system memory
Chipset:
- Intel 845GE Graphics Memory Controller Hub (GMCH) with Accelerated Hub Architecture bus
- Intel 82801DB I/O Controller Hub (ICH4) with Accelerated Hub Architecture bus
- Intel 82802AB Firmware Hub (FWH)
Audio:
- Analog Devices AD1981B codec featuring SoundMAX Cadenza - supporting AC '97 processing
Video:
- Intel Extreme Graphics controller
- AGP Connector supporting 1x, 2x, and 4x AGP cards (1.5V only) or an AGP Digital Display (ADD) card
I/O Control:
- SMSC LPC47M172 LPC Bus I/O Controller
Peripheral Interfaces:
- Up to six USB ports (four back panel ports and two front panel ports)
- One serial port
- One parallel port
- Two IDE interfaces with Ultra DMA33 and ATA66/100 support
- One diskette drive interface
- PS/2 keyboard and mouse ports
- Three fan connectors
Expansion capabilities:
Wake-up From Network:
- Wired for Management (WfM) 2.0 compatible
- Support for system wake-up using an add-in network interface card with remote wake-up capability or integrated LAN
[Home] [Previous Page] [Next Page]
|
|
|
|
